Angebot!

3er Set Bettwinkel für VW Bus Transporter-Caravelle T5 – T6.1

127,00 - 137,00

Winkel-Set aus Edelstahl zum Bau einer Schlafsitzbank incl. Zubehör
– jetzt vergünstigt bestellen –

Beschreibung

(English version below)

< Version 3.2 mit verbesserter Oberfläche, Sichtseite geschliffen, Schutzfolie und optimierten Bohrungspositionen >

Mit dem angebotenen Winkelset kann sehr einfach ein Klappbett in den Volkswagen Bus T5 bis T6.1 gebaut werden. Die Besonderheit liegt in der Verwendung der originalen 3er Sitzbank. Es wird ein Brett an der Rückenlehne der original Sitzbank montiert. Dazu werden zwei Winkel auf die Kopfstützen gesetzt und zwei Winkel seitlich im Gelenkpunkt verschraubt.

  • Winkel passen für den langen und kurzen Radstand.
  • Das Set passt für die originalen 3er Klapp-Sitzbänke mit fester Position, also Ausführung Transporter, Kombi, Caravelle und Mixto.
  • Das Set passt NICHT für original-Schlafbänke ab Werk aus dem Multivan und California.

Das Winkelset besteht aus (Lieferumfang):

  • 3x Kopfstützenwinkel mit Schutzfolie auf der Sichtseite

  • 2x Seitenwinkel mit Schutzfolie auf der Sichtseite

  • Hochfeste Schrauben zur Befestigung

  • Distanzscheiben aus Edelstahl

  • Passgenaue Gummitüllen für die Kopfstützenwinkel

Zum Lösen der original-Schrauben an der Sitzbank ist ein Vielzahn XZN erforderlich. Optional kann das Set daher als Paket zusammen mit einer 1/2″ Vielzahn-Bit-Stecknuss erworben werden. Diese passt auch für die Schrauben der Zurrösen im Transporter-Boden.

Eine 8-Seitige Anleitung mit bemaßten Zeichnungen, Bildern und Tipps wird nach dem Kauf als pdf-Download bereitgestellt – bitte dazu während des Bestellvorgangs mit einem Benutzer-Konto registrieren.


Set of 3 DIY bed brackets for Transporter-Caravelle VW T5 – T6.1 (v3.2)

Description

< Version 3.2 with improved surface, the surface on the visible side has been grounded, protective foil included and optimized hole positions >

The bracket set is for the construction of an easy-to-build foldable bed for the Volkswagen Bus T5 to T6.1. The special feature is that the original VW 3-seater bench is used as the basis for the bed. A board is mounted on the backrest of the original bench. To do this, two angles are placed on the headrests and two angles are screwed to the sides at the respective hinge points.

  • Brackets fit both long and short wheelbase.
  • The set is compatible with the original 3-seater foldable bench with a fixed position – so as is the case in the Transporter, Kombi, Caravelle and Mixto.
  • The set CANNOT be used to rework the original VW sleeping bench fitted in the Multivan and California.

The set consists of (scope of delivery):

  • 3x headrest brackets with protective foil on the visible side
  • 2x side brackets with protective foil on the visible side
  • High-strength attachment screws
  • Stainless steel spacers
  • Custom-fit rubber grommets for the headrest brackets

A multi-tooth XZN socket is required to loosen the original screws on the seat. The set can therefore optionally be purchased as a package together with a 1/2″ multi-tooth bit socket. This socket can additionally be used to loosen the screws of the lashing points on the floor of the VW transporter.

An 8-page DIY manual with technical drawings, dimensions, and tips will be provided as a pdf download after purchase. Currently, it is only available in German and we are still working on a translation. To be able to download the manual, please register for a user account during the ordering process.

Zusätzliche Informationen

Gewicht 1,2 kg
Oberfläche

gebürstet

passend für Baujahre

VW T5 / T5.1 2003-2009
VW T5.2 2009-2015
VW T6 2015-2019
VW T6.1 2019-

Herstellung

Made in Germany

passen für folgende Modelle

Transporter, Kombi, Caravelle, Mixto

NICHT passend für Einzelsitz

Passt NICHT für Einzelsitze, da diese über eine andere Klappmechanik verfügen.

NICHT passend für Schlafbänke ab Werk

Passt NICHT für die original-Schlafbänke, wie sie z.B. im Multivan oder California verbaut sind.

GTIN / EAN

4270003754323